Explainer · Materials
What Is a Rowhouse?
A rowhouse shares walls with its neighbors and faces the street on a narrow lot. That simple arrangement supports a distinct pattern of urban life.
A narrow house built against its neighbors
A rowhouse is an individual dwelling, with its own entrance from the street, built directly against the adjacent houses on one or both sides. The shared or touching walls, called party walls, allow the houses to be built with narrow individual widths, typically 12 to 25 feet, that would be impractical for a freestanding structure.
Rowhouses have housed urban residents for centuries across European and American cities. Philadelphia, Baltimore, Washington, and Boston have rowhouse neighborhoods built in large quantities between the 1820s and 1930s, where the type became the primary form of dense urban housing for middle- and working-class families.
The party wall is an engineering and legal relationship
A party wall literally divides two structures: each owner owns half of it, or both own the whole thing jointly, depending on local law. Building and maintaining it requires cooperation between neighbors.
The structural arrangement allows each house to be built taller and stronger than it could be without the lateral support from the neighboring structure. That mutual support is part of why rowhouse neighborhoods are physically durable: the connected structures reinforce one another against settling and lateral loads.
Maintaining and replacing windows and the structural wall that faces the party wall line requires compliance with party-wall agreements that can be centuries old in some cities.
What the narrow floor plan produces
A rowhouse 18 feet wide has rooms roughly 15 feet across after accounting for interior walls. Rooms tend to run front to back, with light arriving from the street facade, the rear yard, and sometimes skylights or narrow light wells.
That constraint produces a characteristic spatial sequence: a stair rising through the center or side of the house, living spaces on the main floor, bedrooms above, and a basement or ground floor often used for utility, parking, or additional living space.
The rear yard, usually private, is the outdoor space the house provides. In denser versions, even that yard may be small or shared. The rowhouse therefore offers urban living without requiring shared amenities like a lobby, elevator, or building management, while still achieving densities that reduce per-household land consumption substantially compared to detached housing.
The type today
New rowhouses are built in American cities today, though often at different price points and for different markets than the originals. Contemporary rowhouse developments sometimes cluster attached units around shared courtyards or along private lanes rather than on the public street grid, a design choice that changes the relationship between the house and the public realm.
Many existing rowhouse neighborhoods built before 1940 cannot be reproduced under current codes in the same jurisdictions: setback requirements, lot-size minimums, or parking requirements would make the original configurations illegal or impractical to build today.
Rowhouses get much of their efficiency from their shared side walls and relatively narrow frontage. More of the lot can become living space or a yard, and more front doors can fit along a walkable block. But a rowhouse's interior can be constrained by daylight and stairs; design matters for families, older residents, and accessibility. The form offers a compelling option, not a universal answer to every housing need.
See it in practice
Explore the people and projects connected to this subject.
- The American Housing Corporation · Austin, Texas