BUILDPLACESExploreExplainers

Explainer · Streets

Speed Table or Speed Hump?

The difference between a speed hump and a speed table is visible from the car: one rises and falls, while the other stays flat long enough to carry a crossing.

Two shapes, two behaviors

A speed hump is a rounded rise placed across the travel lane. A speed table is a flat-topped platform that rises to a level surface and extends for several feet before descending on the other side.

The distinction matters because the two devices slow vehicles in different ways and fit different situations. A speed hump typically reduces speeds to around 10 to 15 miles per hour at the crest because a vehicle has to slow to avoid a jarring bounce. A speed table can be crossed at 20 to 25 miles per hour and is sometimes designed so pedestrians cross on the raised platform, which puts them at the same level as drivers.

The flat top is a crossing opportunity

When a speed table is placed at a crosswalk, pedestrians walk across the raised surface rather than stepping up and down. The vehicle has to slow before reaching the crossing, which reduces conflict speed, and the pedestrian is at a more visible height relative to the driver.

This design is common on residential streets where calming and pedestrian crossings are both needed, and in locations where a signal would be unnecessary but an unprotected crossing at grade feels unsafe.

Some transit agencies prefer speed tables to speed humps because the flat top allows a bus to cross without the passengers experiencing an abrupt bump. A city with many bus routes may favor speed tables specifically to protect passenger comfort.

Emergency and transit routes shape the choice

Any vertical deflection can slow emergency vehicles and add time to response runs. Agencies that manage traffic calming typically coordinate with fire and emergency services to review proposed locations, choose device heights and lengths that minimize delay without eliminating calming benefit, and avoid placing devices on primary emergency routes.

The impact on an ambulance carrying a patient is different from the impact on a fire engine responding to a call. Speed tables, which have longer, more gradual transitions, often impose less delay on emergency vehicles than the same number of standard speed humps.

The shape should match the target speed

Traffic calming guidelines specify device dimensions based on the target speed for the block. A hump designed to feel comfortable at 20 miles per hour will feel mild to a driver going 30 and rough to one going 10. Getting the geometry right means starting with the speed the street needs to support and choosing a device designed for that outcome.

Spacing matters as much as individual device geometry. A single speed table on a long block may slow vehicles at the table but allow acceleration to original speeds before the next one. Effective calming typically places devices at intervals short enough that a driver cannot comfortably reach the target speed between them.

The geometry changes how a street feels. A speed hump uses a relatively short raised profile to slow vehicles; a speed table has a longer flat top, sometimes aligned with a pedestrian crossing. Neither is automatically appropriate on a bus route or emergency corridor, and spacing matters if drivers accelerate between devices. Traffic calming is a network design problem, not merely a collection of bumps.